HOME > NEWS

Stainless steel wire mesh material maintenance

Stainless steel wire  mesh material maintenance

Screen is widely used in real life, people know little to screen maintenance knowledge, some people think that as long as it is stainless steel sieve generally will not rust, due to the stainless steel corrosion is good, is the table surface to form a layer of passivation film, it is in the nature exists in the form of more stable oxide.That is to say, stainless steel, though different in accordance with the conditions of use, oxidation degree is different, but in the end are oxidation, this phenomenon is commonly known as corrosion.All exposed on the surface of metal corrosion environment produce electrochemical reaction and chemical reaction, even from corrosion.Of the stainless steel surface, therefore, must carry out regular cleaning and maintenance, to keep its gorgeous surface and prolong service life.Clean stainless steel surface must pay attention to not occur when the surface scratch, avoid using bleach composition and abrasive detergents, steel wire ball, grinding tools, etc., to get rid of washing liquid, wash and then rinse with clean water at the end of the surface.1, stainless steel surface dust, and easy to get rid of dirt, can use soap and detergent or warm water washing.2, label, sticker on the surface of the stainless steel, with warm water and detergent to wash, binder composition, use of alcohol or organic solvent scrubbing (ethyl ether, benzene).3, grease, oil, lubricating oil contamination on the surface of the stainless steel, with a soft cloth wipe up, after use neutral detergent or ammonia solution or use the detergent for cleaning.4, stainless steel surface with bleach and various acid, immediately wash with water, then use ammonia solution or neutral fizzy soda solution immersion, use neutral detergent or warm water washing.5, stainless steel surface with rainbow lines, and excessive use of detergents or oil is caused when catharsis neutral detergent to wash with warm water.6, stainless steel surface contamination caused by rust, available 10% nitric acid or abrasive detergent washing, also can use special washing washing.As long as we use the correct maintenance method, we can extend the service life of stainless steel, keep it clean, bright, ornate style.

Ask For Quote

Your name

Your email

Message

Translate »